Hairline Finish 316 Stainless Steel 4*8 2b/hl/no.1/no.4/8k Sheet Or Plate

316 stainless steel - for food and surgical stainless steel. Also known as marine grade stainless steel, because it has higher resistance to chloride corrosion than type 304. By adding Mo in this type of stainless steel, it can greatly improve the high temperature corrosion resistance and strength, so it can withstand 1200 °C. It can be used under very severe conditions up to 1300 °C. It is easy to brake or roll into a variety of parts, and is also suitable for stamping, upsetting and drawing, but it is recommended to work backwards to reduce internal stresses.

Send Inquiry

Parameter

Material type: Stainless Steel

Form: Sheet

Size: 1.2mm thick

Grade: 316

Surface: 240 Grit silicon

Production method: Cold Rolled

Cutting tolerance: +/-0.5mm

Chemical designation: X2CrNiMo17-12-2

Chemical composition(WT%)

(Si) :≤1.00

(Mn) :≤2.00

(Cr) :16.0 to 18.5

(P) :≤0.035

(S) :≤0.030

(Ni) : 10.0 to 14.0

(Mo): 2.0 to 3.0

Chemical Composition

Element	Content Range	Role
Chromium (Cr)	16.0–18.0%	Forms passive oxide layer for corrosion resistance.
Nickel (Ni)	10.0–14.0%	Stabilizes austenitic structure, improves toughness.
Molybdenum (Mo)	2.0–3.0%	Enhances chloride resistance.
Carbon (C)	≤0.08% (≤0.03% for 316L)	Low carbon reduces weld decay.