Introduction
304L Stainless Steel Welded Steel Pipe is a tubular product made of 304L stainless steel through advanced welding technology. 304L Stainless Steel Welded Steel Pipe is mainly composed of chromium (Cr), nickel (Ni), and trace amounts of carbon (C), silicon (Si), manganese (Mn), and other elements, of which the Cr content is between 18.00% and 20.00%, the Ni content is between 8.00% and 12.00%, and the C content is extremely low, not exceeding 0.03%. Due to its excellent corrosion resistance and good processing performance, it is widely used in food processing, chemical industry, petroleum, construction, automobile manufacturing medical equipment, and other fields.
Feature
Good weldability and processability
The low carbon characteristics of 304L Stainless Steel Welded Steel Pipe reduce the precipitation of carbides during welding and reduce the risk of intergranular corrosion after welding. In common welding methods such as TIG welding, the welded joint strength of 304L Stainless Steel Welded Steel Pipe can reach more than 90% of the parent material strength, and the welding deformation is small, ensuring the integrity and reliability of the pipeline. At the same time, the ductility of 304L Stainless Steel Welded Steel Pipe can reach more than 20%, and it is easy to process into various shapes and sizes, meeting the needs of different application scenarios.
Excellent hygienic performance
The inner surface roughness Ra value of 304L Stainless Steel Welded Steel Pipe can reach less than 0.4μm, which is easy to clean and disinfect and can effectively prevent bacterial growth. After 304L Stainless Steel Welded Steel Pipe contacts food-grade acid and alkali solutions, the number of bacteria on its surface is far lower than the limit specified by national standards.
Excellent antioxidant performance
The Cr element in 304L Stainless Steel Welded Steel Pipe can react with oxygen to form a dense chromium oxide protective film, which can effectively prevent oxygen from further reacting with the metal elements inside the steel pipe and delay the oxidation process of the steel pipe. At a high temperature of 600℃, the oxidation rate of 304L Stainless Steel Welded Steel Pipe is only 0.02mm/year, which is much lower than the oxidation rate of other ordinary steels. 304L Stainless Steel Welded Steel Pipe can be used in outdoor environments for more than 50 years without obvious corrosion.
Welding and related precautions
Material and equipment selection
Use tungsten inert gas (TIG) welding method.
ER308L should be selected as filler metal.
Argon purity should reach or exceed 99.96%.
Pre-welding preparation
Grind the pipe fittings in the grooves and on both sides to reveal the metallic luster.
Smooth out any pits on the inner and outer surfaces of the pipe, and ensure that there are no visible scratches or pits within 50 mm.
Use organic solvents such as acetone or ethanol to clean oil, rust, and other contaminants within 200 mm.
Precautions during welding
Use beveled V-shaped grooves to reduce heat input.
Use connecting blocks of the same material to fix the parts during assembly, and use custom tools to correct misalignment.
When misalignment occurs, pause welding and gently tap the higher side with a copper hammer.
The back of each layer of weld should be protected by argon, and the assembly should be purged with argon for at least 2 minutes before welding.
Both ends of the pipe should be sealed, and the opening length should not exceed one-eighth of the diameter.
When it is difficult to completely purge argon gas for a long pipe, place a sealing plate near the weld and perform local argon protection.
The TIG welding gun is kept close to the welding surface and rotated while moving, maintaining a proper angle to prevent oxidation.
Use internal filler welds for vertical welds and external filler welds for flat welds.
The filler wire does not touch the tungsten electrode or directly penetrate the arc column area.
The end of the filler wire is kept in the protected area.
Minimize filler wire oscillation and use narrow welding channels.
Each weld is carefully checked, the joints are staggered by 50 mm, and the interpass temperature does not exceed 150°C.
Make sure to fill the arc crater to avoid arc cracking.
Finally, bevel the weld end until the root is blue, and fill the arc crater before stopping.
Chemical Composition
The chemical composition of 304L stainless steel welded pipe mainly includes:
- Chromium (Cr): 18% - 20%
- Nickel (Ni): 8% - 12%
- Manganese (Mn): ≤ 2%
- Silicon (Si): ≤ 1%
- Phosphorus (P): ≤ 0.045%
- Sulfur (S): ≤ 0.03%
- Titanium (Ti): ≤ 0.75%
- Carbon (C): ≤ 0.03%
- The remainder is Iron (Fe).
FAQ
Hot Tags: 304l stainless steel welded steel pipe, China 304l stainless steel welded steel pipe manufacturers, suppliers, factory, stainless steel shape with easy installation, stainless steel shape for heat exchangers, stainless steel shape for mechanical parts, stainless steel shape with low maintenance, stainless steel oval shape, stainless steel shape for lightning protection systems

