440C Stainless Steel Sheet – Key Properties:
Grade: AISI 440C / UNS S44004
Composition:
Carbon (C): 0.95–1.20%
Chromium (Cr): 16–18%
Manganese (Mn): ≤1.00%
Silicon (Si): ≤1.00%
Molybdenum (Mo): ≤0.75% (optional)
Phosphorus (P) & Sulfur (S): ≤0.04%
Hardness:
Annealed: ~HB 269
Hardened & Tempered: HRC 56–60 (can reach up to HRC 62 with proper heat treatment)
Corrosion Resistance: Good (but inferior to 304/316 stainless steels due to high carbon content)
Magnetic: Yes (martensitic structure)
Common Applications of 440C Stainless Sheet:
✔ Knife blades & cutlery
✔ Ball bearings & valve parts
✔ High-wear industrial components
✔ Surgical & dental instruments
✔ Mold inserts & tooling
Available Forms & Sizes (Typical):
Thickness: 0.1mm – 6mm (0.004" – 0.25") or custom
Width: Up to 1500mm (59")
Surface Finish: Cold-rolled, annealed, polished (e.g., #4 brushed, mirror)
Heat Treatment Recommendations:
Annealing: Heat to 815–870°C (1500–1600°F), slow cool (~15°C/hr)
Hardening: Heat to 1010–1065°C (1850–1950°F), oil or air quench
Tempering: 150–370°C (300–700°F) for optimal hardness
Machining & Fabrication Notes:
Machinability: Fair (similar to other hard stainless steels) – use carbide tools
Weldability: Poor (preheat & post-weld heat treatment recommended)
Hot Tags: 440c stainless steet, China 440c stainless steet manufacturers, suppliers, factory, rod martensitic stainless steel, trace element martensitic stainless steel, construction martensitic stainless steel, global martensitic stainless steel, vanadium martensitic stainless steel, oxidation resistance martensitic stainless steel

